TEC MA-600 Series Programming Manual

Also see for MA-600 Series: Owner's manual Maintenance manual

Contents

6. TERMINAL FILE PROGRAMMING EO3-111066.34 Tone Volume Setting6-1466.34 Tone Volume SettingKey-in tone for the ECR keyboard and error tone are selectable from High, Low, and OFF.Any time outside a saleMode Lock: SET1) Menu Tree2) Operation FlowchartMain Menu ECR is being outside a sale and in SET mode.Depress [↓] four times then [Enter].orDepress [5].“5 BASIC” is selected.Depress [↓] four times then [Enter].orDepress [5].“5 KEY-IN TONE” is selected.Select a key tone with the [↑] or [↓]key. It is selectable from HIGH, LOW, and OFF.[Enter] The [Enter] key depression results in that the selected key tonesounds for 2 seconds. (See NOTE 1 below.)[End] This setting is ended. A long receipt is issued and the displayreturns to Main Menu screen.NOTES:1. The [Enter] key depression results in that the selected key tone sounds for 2 seconds. When the key tone“OFF” is selected, no sound occurs.2. After performing a RAM Clear, the key tone “HIGH” is set as standard.OPERATIONCONDITION