6. TERMINAL FILE PROGRAMMING EO3-111066.15 Print Line Item Name Programming6-776.15 Print Line Item Name ProgrammingPrint Line Item Names not listed in Section 6.14 Financial Report Item Name Programming can beprogrammed here.Anytime outside a saleMode Lock: SET1) Menu Tree2) Operation FlowchartMain Menu ECR is being outside a sale and in SET mode.Depress [↓] then [Enter].orDepress [2].“2 NAMES” is selected.Depress the [↓] key six times then[Enter] key.orDepress [7].“7 PRINT ITEM NAME” is selected.Select a print item name of which nameis to be programmed with the [↑] or [↓]key.The print line item name already programmed is displayed.[Enter] The ECR enters character input mode.Input a print line item name. NOTE 1 below[Enter] The print line item name is entered and printed.[End] This programming is ended. A long receipt is issued and thedisplay returns to Main Menu screen.NOTES:1. The maximum number of characters programmable for each item are shown in the table on the followingpages. Please note that some items require their name entries as one set. The maximum number ofcharacters in the table shows the capacity in one-byte characters. A two-byte character occupies two one-byte characters’ space. (Also refer to CHARACTER ENTRIES at the beginning of this chapter.)2. As shown in the table on the following pages, the standard program data are preprogrammed which is auto-set after a RAM Clear). Therefore, program only the items that need to be changed.OPERATIONCONDITION
