6. TERMINAL FILE PROGRAMMING EO3-111066.7 Footer Message Programming6-533) Example:To program the following Footer Message.Operation LCD Display RemarksWhen the ECR is being outside a saleand in SET mode, depress the [1] or[Enter] key.Depress the [↓] key. The cursor is moved on to “2 FOOTERMESSAGE”.Depress the [2] or [Enter] key.The message already programmed isdisplayed.While ? is shown on the upper-right cornerof the LCD display screen, the [?] keydepression results in that the followingguidance message appears on the LCDdisplay.The [Enter] key depression allows theECR to enter the 1st line messageinput mode. (The [C] key depressionclears the message alreadyprogrammed.) The 1st line message isinput.(To program a message in a desiredline, move the cursor there with the [↓]key then depress the [Enter] key.)Numbers of programmed characters and ofprogrammable characters are displayed onthe 7-segment numeric display.Example of key operation)[→] [→] [→] [→] [→] [→] [T] [A/a] [h] [a] [n][k] [→] [A/a] [Y] [A/a] [o] [u] [Enter]The [Enter] key depression results inthat the input message is entered anddisplayed.When the [Enter] key is depressed, themessage programmed in the 1st line isprinted.(continued on the next page)T h a n k y o uC a l l a g a i nLine No. 1Line No. 2Number of programmed charactersNumber of programmable characters
