6. TERMINAL FILE PROGRAMMING EO3-111066.15 Print Line Item Name Programming6-783) ExampleTo program the amount mark “€” in Item Code 7: (The amount mark has not been preset as the standardprogram data).Meanwhile, the names of the other items in the Item Code 7 should remain unchanged as the standardprogram data (i.e. “@” for Unit Price Symbol and “ITEM” for Sale Item Count Symbol).Operation LCD Display RemarksWhen the ECR is being outside a saleand in SET mode, depress the [↓] key.The cursor is moved on to “2 NAMES”.Depress the [2] or [Enter] key. “2 NAMES” is selected.Depress the [↓] key six times. The cursor is moved on to”7 PRINT ITEM NAME”.Depress the [7] or [Enter] key. ”7 PRINT ITEM NAME” is selected.Depress the [↓] key six times, thendepress the [Enter] key.(Item code 7 (“@ ITEM ”) is selected.)While ? is shown on the upper-right cornerof the LCD display screen, the [?] keydepression results in that the followingguidance message appears on the LCDdisplay.The [C] key depression clears the printline item name already programmed.The print line item name alreadyprogrammed is displayed.Input a desired name. Numbers of programmed characters and ofprogrammable characters are displayed onthe 7-segment numeric display.Example of key operation)400[#] 900[#] [I] [T] [E] [M] [→] [Enter]The [Enter] key depression results inthat the input name is entered anddisplayed.When the [Enter] key is depressed, theprogrammed data is printed.(continued on the next page)
