TEC MA-600 Series Programming Manual

Also see for MA-600 Series: Owner's manual Maintenance manual

Contents

6. TERMINAL FILE PROGRAMMING EO3-111066.8 Store Name Message Programming6-556.8 Store Name Message ProgrammingA maximum of 128 characters of Store Name Message (32 characters x 4 lines) to be printed on the receipt isprogrammed here.Prior to the Store Name Message Programming, be sure to select SET status for Address No. 31, Bit No. 5of the system option.Any time outside a saleMode Lock: SET1) Menu Tree2) Operation FlowchartMain MenuDepress [1] or [Enter]. “1 MESSAGES” for various message programming is selected.Depress [↓] twice then [Enter].orDepress [3].“3 STORE MESSAGE” is selected.The message already programmed is displayed.[Enter] The ECR enters the 1st line message input modeInput a message in the 1st line. A maximum of 32 one-byte or 16 two-byte characters are input.[Enter] The 1st line message is entered and the programmed data is printed.[Enter] The ECR enters the 2nd line message input modeInput a message in the 2nd line. A maximum of 32 one-byte or 16 two-byte characters are input.[Enter] The 2nd line message is entered and the programmed data is printed.[Enter] The ECR enters the 3rd line message input modeInput a message in the 3rd line. A maximum of 32 one-byte or 16 two-byte characters are input.[Enter] The 3rd line message is entered and the programmed data is printed.[Enter] The ECR enters the 4th line message input modeInput a message in the 4th line. A maximum of 32 one-byte or 16 two-byte characters are input.[Enter] The 4th line message is entered and the programmed data is printed.[End] This programming is ended. A long receipt is issued and the displayreturns to Main Menu screen.*: To program a message in a desired line, move the cursor there withthe [↓] key then depress the [Enter] key.*OPERATIONCONDITION