6. TERMINAL FILE PROGRAMMING EO3-111066.12 PLU Name Programming6-67(continued from the previous page)Operation LCD Display RemarksDepress the [2] or [Enter] key.Depress the [↓] key three times. The cursor is moved on to “4 PLU (ITM NO.)NAME”.Depress the [4] or [Enter] key. “4 PLU (ITM NO.) NAME” is selected.Depress the [Enter] key.(PLU Code No. 0001 is selected.)When programming a name of another PLU,move the cursor on to a desired PLU with the[↓] or [↑] key, then depress the [Enter] key.The [C] key depression clears the PLUname already programmed.The PLU name already programmed isdisplayed.Input a desired name. Numbers of programmed characters and ofprogrammable characters are displayed onthe 7-segment numeric display.Example of key operation)[T] [A/a] [o] [m] [a] [t] [o] [Enter]The [Enter] key depression results inthat the input name is entered anddisplayed.When the [Enter] key is depressed, theprogrammed data is printed.The [End] key depression allows theECR to end this programming.A long receipt is issued and the displayreturns to Main Menu screen.TEC STORE1343 PEACH DRIVEPHONE: 87-6437Open 8:00am to 7:00pmClosed: every Wednesday31-10-2005 MON #0PLU NAME0001 Tomato0009 13:23TM
