TEC MA-600 Series Programming Manual

Also see for MA-600 Series: Owner's manual Maintenance manual

Contents

6. TERMINAL FILE PROGRAMMING EO3-111066.6 Commercial Message Programming6-496.6 Commercial Message ProgrammingA maximum of 96 characters of Commercial Message (32 characters x 3 lines) to be printed on the receipt isprogrammed here.Any time outside a saleMode Lock: SET1) Menu Tree2) Operation FlowchartMain MenuDepress [1] or [Enter]. “1 MESSAGES” for various message programming is selected.Depress [1] or [Enter]. “1 COMMERCIAL MESSAGE” is selected.The message already programmed is displayed.[Enter] The ECR enters the 1st line message input mode.Input a message in the 1st line. A maximum of 32 one-byte or 16 two-byte characters are input.[Enter] The 1st line message is entered and the programmed data is printed.[Enter] The ECR enters the 2nd line message input mode.Input a message in the 2nd line. A maximum of 32 one-byte or 16 two-byte characters are input.[Enter] The 2nd line message is entered and the programmed data is printed.[Enter] The ECR enters the 3rd line message input modeInput a message in the 3rd line. A maximum of 32 one-byte or 16 two-byte characters are input.[Enter] The 3rd line message is entered and the programmed data is printed.[End] This programming is ended. A long receipt is issued and the displayreturns to Main Menu screen.NOTES:1. For each line, a maximum of 32 one-byte characters or 16 two-byte characters can be entered.A combination of both types is also available.2. If three blank lines are programmed for a commercial message, their portions on the receipt will be closed.If at least one line message is programmed, the other two lines will be blank.*: To program a message in a desired line, move the cursor there withthe [↓] key then depress the [Enter] key.*OPERATIONCONDITION