TEC MA-600 Series Programming Manual

Also see for MA-600 Series: Owner's manual Maintenance manual

Contents

6. TERMINAL FILE PROGRAMMING EO3-111066.5 System Option Programming6-34System Option TableStandard Bit Set (auto-set by RAM Clear)ADDRESS NO. CONTENTS127 DRAWER OPTIONBITNO. ITEM SELECTIVE STATUS STANDARDSTATUS REMARKSRESET NOT COMPULSORY1 Drawer CloseCompulsory SET COMPULSORY * NOTE 1 belowRESET NON-ACTIVE *2 Drawer Warning AlarmSET ACTIVENOTE 2 belowRESET SINGLE DRAWER *3 Single-drawer or Multi-drawer SET MULTI DRAWERNOTE 3 belowRESET BY CASHIER *4 Multi-drawer ControlSET BY CURRENCYRESET IN DOMESTIC CURRENCY *5Selection of Change atTendering in ForeignCurrencies SET IN FOREIGN CURRENCYNOTE 4 belowRESET 1 DRAWER *6 Number of Drawers(if Multi-drawer spec.) SET 2 DRAWERSRESET *7 -- vacant --SETRESET *8 -- vacant --SETNOTE 1: If SET, the Drawer-close Compulsory option is active. In this case, when the drawer remains open, any operations except [RF], [JF], [C], numericinput for Sign-ON are prohibited. This rule is applied in REG, MGR, - , and LOCK modes; in the other modes, the drawer may remain open.NOTE 2: This bit status selection is effective only when Bit No. 1 is SET. If SET (ACTIVE), the setting in the DRAWER WARNING TIME operation will beeffective. In this operation, a time value in seconds can be set for the time length with the drawer open until the warning alarm generated (the initialvalue is 15 seconds).NOTE 3: If SET, the Multi-drawer specification is selected.In the case of Cashier Code Entry Method (using [LOG] or [LOG/RECEIPT] key), a drawer is to be designated in sale entries, and the number ofdrawers will be further selected at Bit No. 6.In the case of Cashier Key Method, the drawer to be used will be fixed as in the following:Drawer 1 for Cashier 1, Drawer 2 for Cashier 2 & all others.NOTE 4: This bit status selection is available regardless of the status selection for the bit No. 3 and the bit No. 4 in this address.If RESET, change is returned to a customer by the domestic currency in the foreign currency tendering operation.If SET, change is returned to a customer by the foreign currency, the symbol “ ” is displayed in the leftmost 2 digits on the 7-segment Numericdisplay.• When change is returned to a customer by the foreign currency, the symbol “ ” will always be displayed even if the option of the cashier No.display or the PLU price level display (Bits No. 5 and No. 6 of Address No. 4) has been selected.• When change is returned to a customer by the foreign currency, the Drawer 2 will open if both the bit No. 3 and the bit No. 4 in this address havebeen “SET”.