Printer drivers and firmware User guide16USB interface (Windows2000/XP)Make sure that the USB interface is selected in the printers menu forUser 1, that a printer driver has been installed and the printer is definedas default printer.Downloading firmware tothe printerTo load new firmware to the printer, proceed as follows. As mentionedbefore it is important that no other device (printer) is set to the inter-face you want to use for the download.Click therefore Start > Control Panel > Printers and Faxes andcheck that no printer is set to the port you want to use. E.g. if you wantto use the serial interface RS232 no printer may have connected to theCOM1 port.1. Browse to the folder where the firmware files are stored.2. Double-click the Standard Model PB Flash VX.XX.exe file.3. On the Memory Writer screen select the interface (in our exampleserial port).4. Make sure that the settings for port, baudrate, parity bit and stopbit are correct.5. Select IPL FIRMWARE from Download Type.6. Click Browse and select the BL_XXXX.IPL file.7. Click FLASH NOW; the download process starts.When the download process is finished, the printer performs an initial-ization8. Repeat step 5 to 7 for the FWXXX.mfw file and thePBCGXXXX.BIN file.
