User guide Menu47Menu handlingKey functions You can navigate in the current menu using the three keys of the con-trol panel.USER 1 key In menu mode the USER 1 key has the following functions:Press the USER 1 key to return to the previ-ous parameter group or parameter on thesame menu level.The USER 1 key is also used for changing pa-rameter settings (see also STOP/EJECT key,page 48).If this key is pressed when the first parametergroup or parameter of the respective menulevel is active, the following message appearson the LCD display:Pressing the USER 1 key again will open thelast parameter group or parameter of the samemenu level.By pressing the STOP/EJECT key you willreturn to the previous menu layer (see alsoSTOP/EJECT key, page 48).USER 2 key In menu mode the USER 2 key has the following functions:Press the USER 2 key to select the nextparameter group or parameter on the samemenu level.The USER 2 key is also used to changeparameter settings (see also STOP/EJECT key,page 48).If this key is pressed when the last parametergroup or parameter of the respective menulevel is active, the following message appearson the LCD display:MENUUSERSETUPUSER1 STOP/EJECTUSER2PAPERReturn toPrev. LayerSETUPUSER1 STOP/EJECTUSER2PAPERMENUUSERSETUPPAPERUSER1 STOP/EJECTUSER2
