Menu User guide48Pressing the USER 2 key again will open thefirst parameter group or parameter of thesame menu level.By pressing the STOP/EJECT key you willreturn to the previous menu layer (see alsoSTOP/EJECT key, page 48).STOP/EJECT key In menu mode the STOP/EJECT key has the following functions:If pressed in a main menu level the next menulevel is selected (e.g. MENU USER >Default Set User 1).If pressed when a changeable parameter itemis on the display, an asterisk appears on thedisplay; you can now change this item now bypressing the USER 1 or the USER 2 key.If pressed after you have changed a parameteritem the new value is confirmed. The LCDdisplays the message Accepted after the pa-rameter item is changed.PAPERReturn toPrev. LayerSETUPUSER1 STOP/EJECTUSER2MENUUSERSETUPPAPERUSER1 STOP/EJECTUSER2SETUPPAPERDefault SetUser1 * USER1 STOP/EJECTUSER2Default SetUser2AcceptedSETUPUSER1 STOP/EJECTUSER2PAPER
