User guide Control panel27Key functions inmenu modeIn menu mode the control panel keys have the following functionsUSER 1 keyThe USER1 key is used to go to the next pa-rameter group or next parameter on the samemenu level (symbolized by an arrow pointingupwards).It is also used to change parameter settings.For further details refer to the section Menuhandling, page 47.USER 2 keyThe USER2 key is used to go to the next pa-rameter group or next parameter on the samemenu level (symbolized by an arrow pointingdownwards).It is also used to change parameter settings.For further details refer to the section Menuhandling, page 47.STOP/EJECT key In menu mode the STOP/EJECT key has the following functions:The STOP/EJECT key is used to select thenext menu level (e.g. MENU USER > De-fault Set User 1), to open a parameter itemfor changing and to confirm changed parame-ter items.For further details refer to the section Menuhandling, page 47.MENUUSERSETUPUSER1 STOP/EJECTUSER2PAPERMENUUSERSETUPPAPERUSER1 STOP/EJECTUSER2MENUUSERSETUPPAPERUSER1 STOP/EJECTUSER2SETUPPAPERDefault SetUser1 * USER1 STOP/EJECTUSER2
