User guide Menu57Menu parameters The following section introduces and explains all the possible menusettings. The default setting is marked by an asterisk (*)Parameter group Parameter Possible settings DescriptionMENUCOMMONDefault Set Off *AllMenu 1Menu 2Sets all parameters to the default settings.Menu 1 sets all parameters of Menu 1 to thedefault settings.Menu 2 sets all parameters of Menu 2 to thedefault settings.Copy Menu Menu1 to Menu2 *Menu2 to Menu1Copies the settings of Menu 1 to Menu 2 andvice versa.Change Menu Menu1 *Menu2Defines if the parameter settings of Menu 1 orof Menu 2 are changed.Language English *GermanFrenchSpanishItalianTurkishSelects the display language.Share User Auto *Manual 1)Selects the method to share this printer withmultiple users.Auto: Printer handles print jobs for User 1 andUser 2 automatically.Manual: After receiving a print job for User 1 orUser 2 the respective USER 1 or USER 2 keymust be pressed to start the printout.Time to Idle 1 sec *10 sec30 sec60 secSelects the time in seconds to return to idlestate after completion of all jobs and ejectingpaper in order to change to another user incase of Auto mode.NOTE: This parameter is only displayed ifunder Share User the setting Auto has beenselected.MENUCHARACTERCharacter Pitch 10 CPI *12 CPI15 CPI17 CPI20 CPI24 CPIProportionalSets the characters per inch (character pitch).The higher the parameter the smaller the char-acter spacing.If Proportional is selected, only the actuallyrequired space for the character width is used.1) Only in Epson and IBM emulation2) Only if MSR-H is installed3) Only for printer model with second serial interface
