Control panel User guide22User 1 and User 2 indicators The USER 1 and USER 2 LEDs are normally under the control of theapplication. They are available to indicate to the user that the appropri-ate interface is active. Normally in Olivetti, IBM or Epson (Auto)em-ulations, with dual host connections they will indicate that a job isavailable for the interface associated with the USER. In Epson Emu-lation (Manual mode) they are lit under the control of the printer to in-dicate the availability of a job for process: the job can be released byinserting paper and pressing the associated key.However please be aware that some applications may uses the LEDsand keys in an entirely different way defined by the host software andoutside the definitions contained in this document.The User 1 or User 2 indicator blinks:` User 1 (interface 1) or User 2 (interface 2) receives data.The User 1 or User 2 indicator lights:` User 1 (interface 1) or User 2 (interface 2) processes data.SETUPPAPERSTOP/EJECTUSER1 USER2SETUPPAPERSTOP/EJECTUSER1 USER2
