6 – Basic Operations–Punch-in and punch-outTASCAM DA-98HR 396.6.9 Reviewing the punched material1 To replay the punch-in, press the PLAY key.Playback start (the REC FUNCTION indicatorsof the armed tracks will continue to flash).2 At the post-roll point, the tape automaticallyrewinds to the pre-roll point.3 If you want to record the punch-in again, pressthe AUTO PUNCH key M so that the indicatorflashes, and repeat the process describedabove.4 If you are satisfied with the punch-in, followthe steps below, otherwise, press LOC 1 toreturn to the punch-in point, press the AUTOPUNCH key so that the indicator flashes, andrepeat the take.6.6.10 Exiting punch-in mode1 Disarm any armed tracks (press the RECFUNCTION keys so that the indicators go out).2 Press the CLEAR key G to exit the AUTOPUNCH (or rehearsal) mode.The punch points are still retained in memory.3 You can press the AUTO MON key so that theindicator goes out and normal monitoringmodes are now in effect (5, “Monitoringmodes”). However, leaving the unit in AUTOMONITOR mode may be more useful whilerecording.
