TASCAM DP-32SD 112 - Quick GuideCreating a new song1. When the recorder is stopped, press the MENU button toopen the MENU screen.2. Use the JOG/DATA dial or the CURSOR (5/b/g/t)buttons to select (highlight green) SONG, and then press theF4 (t) button.The SONG LIST screen opens.3. Press the F4 (t) button to open the menu list and then usethe JOG/DATA dial or the CURSOR (5/b) buttons to selectCREATE.4. Press the F4 (t) button to open the SONG CREATE pop-up window.The created song is given the name SONG_0002.5. Change the name (title) of the song if necessary in the Nameitem. (See “Editing names” on page 28.)6. Use the CURSOR (5/b) buttons to move the cursor(highlighted blue) to select Bit (bit rate) or Hz (samplingfrequency), and then use the JOG/DATA dial to set it asdesired.7. Press the F2 (YES) button.The currently loaded song is saved and a new song iscreated.8. Press the HOME button to return to the Home screen.Connecting and setting the input sources1. Connect an electric guitar to the MIC/LINE INPUTS H jackon the rear panel.Guitar2. Set the LINE-GUITAR switch on the rear panel to GUITAR.The GUITAR indicator lights.GUITAR indicatorNow the guitar is the input source for INPUT H.TIPWhen connecting an electric-acoustic guitar with a built-in preampor an active-type electric guitar, or when using an effects pedal, forexample, between the guitar and this unit, set the LINE-GUITARswitch to LINE on the rear panel.