60 TASCAM DP-32SD11 - Various Other FunctionsWhen the pitch played matches the note shown, the center, t and g icons light green.7. After tuning the instrument, press the HOME button toreturn to the Home screen.PREFERENCE menu settingsUse the PREFERENCE menu to change various settings tooptimize the unit for your use conditions and requirements, aswell as to restore the factory settings.Follow these steps to open the PREFERENCE menu.1. When the recorder is stopped, press the MENU button toopen the MENU screen.2. Use the JOG/DATA dial or the CURSOR (5/b/g/t)buttons to select PREFERENCE, and then press the F4 (t)button.The PREFERENCE screen opens.3. On the PREFERENCE screen, use the CURSOR (5/b)buttons to select a parameter, and then use the JOG/DATAdial to change its setting.Menu item Function ReferenceAuto PowerSaveSet automatic powersaving Page 60Contrast Adjust display contrastPage 27Brightness Adjust display brightnessBacklight Adjust display backlightFoot SWRightSet right footswitch pedalassignmentPage 41Foot SWCenterSet center footswitch pedalassignmentFoot SW Left Set left footswitch pedalassignmentUndo History Set length of undo history Page 39Jump Back Set jumpback time Page 44Auto Monitor Set automatic monitoring Page 60Preview Time Set preview playback time Page 45Peak Hold Set peak hold time Page 35Song NameType Set file name format Page 61Date/Time Set date and time Page 26Initialize Restore default settings Page 61Setting automatic power savingUse the Auto Power Save item to set the amount of timeuntil the unit power turns off after the last user operation orfunction completes.The options and default value are as follows.Options: OFF, 3 min, 5 min, 10 min, 30 min (default)NOTEThe Auto Power Save function is disabled under the followingconditions.(1) During recording or playback(2) When the metronome is in use(3) When the record function is ON(4) When a signal is output from the STEREO OUTCAUTIONBy default, this is set to turn the unit off automaticallyafter 30 minutes. Set this to “OFF” if you do not want theunit to turn off automatically.Setting automatic monitoringInput monitoring is possible when recording is enabled and thetransport is stopped.If automatic monitoring is ON, when playback starts, inputsounds are muted, and only playback sounds can be monitored.Use the AUTO MONITOR item to set this function.OFF (default):Input sounds are not muted even when playback starts.When recording is enabled, input and playback sounds aremixed.ON:When playback starts, input sounds are muted.When recording is enabled, only playback sounds can beheard.