Tascam DP-32SD Owner's Manual

Also see for DP-32SD: Troubleshooting supplement Schematic diagram

Contents

TASCAM DP-32SD 132 - Quick Guide3. Use the fader for TRACK 1 and the STEREO fader to adjustthe playback monitoring level. Use the MONITOR LEVELknob to adjust the final monitoring volume.TIPUse the PAN knob for TRACK 1 on the Mixer screen to set the stereoposition of the track signal.Recording a guitar to TRACK 2Next, you can listen to the rhythm guitar on TRACK 1 as you playthe lead guitar part and record it on TRACK 2.Follow these procedures to change the recording source ofTRACK 2.1. Press the ASSIGN button to open the Assign screen.We want to record the lead guitar sound from INPUT H toTRACK 2, but INPUT B is assigned to TRACK 2 by default.2. Use the CURSOR (5/b/g/t) buttons or press theSELECT button for TRACK 2 to move the cursor (frame) onthe Assign screen to TRACK 2.Use the JOG/DATA dial or press the SOURCE button forINPUT H to set the TRACK 2 recording source to H.3. Press the HOME button to return to the Home screen.4. Press the REC button for TRACK 2.Its REC indicator blinks and the unit enters recordingstandby.When you play the guitar, the input level is shown by the 2level meter (TRACK 2).5. Return to the beginning of the song (ZERO point) and startplayback of the recorded rhythm guitar to practice the leadguitar part along with the recording.Raise the fader for TRACK 2 to hear the input guitar signalalong with the TRACK 1 playback signal through yourheadphones or monitoring system.6. As necessary, use the TRACK 1, 2 and STEREO faders andMONITOR LEVEL knob to adjust the monitoring level andbalance and the PAN knob to adjust the stereo positions.7. Return to the beginning of the song, press the RECORD (0)button to start recording, and play the lead guitar part.The RECORD (0) button lights red and the REC indicator forTRACK 2 stops flashing and stays lit while recording.8. After you finish your performance, press the STOP (8)button to stop recording.The recorded file is saved in the folder of the currentlyloaded song.9. Press the REC button for TRACK 2 so the REC buttonbecomes unlit.Recording a vocal to TRACK 31. Press the ASSIGN button to open the Assign screen.2. Use the CURSOR (5/b/g/t) buttons or press theSELECT button for TRACK 3 to move the cursor (frame) onthe Assign screen to TRACK 3.Use the JOG/DATA dial or press the SOURCE button forINPUT B to set the TRACK 3 recording source to B.3. Press the HOME button to return to the Home screen.4. Press the REC button for TRACK 3.The REC indicator blinks and the unit enters recordingstandby.