Tascam DP-32SD Owner's Manual

Also see for DP-32SD: Troubleshooting supplement Schematic diagram

Contents

24 TASCAM DP-32SD4 – PreparationInserting and removing SD cardsInserting an SD cardInsert the SD card into the SD card slot on the rear panel asshown in the illustration until it clicks into place.NOTEAn SD card is already in the SD card slot when the unit is shippedfrom the factory. If you want to use this card to record and playtracks, there is no need to reinsert it.Removing the cardPush the loaded card in gently to eject it.CAUTION• Always turn the power off (put in standby) before removingan SD card.• If you remove or insert an SD card when the power is on,recorded data could be lost permanently.• SD and SDHC cards that are at least 512 MB in size can beused.• A list of SD cards that have been confirmed to work withthis unit can be found on the TEAC Global Site (http://teac-global.com/).About write-protected SD cardsSD cards have write-protect (lock) switches.Unprotected ProtectedWhen the protect switch is in the LOCK position, files cannot berecorded or edited on the card. Slide the switch away from theLOCK position if you want to record, erase or otherwise changefiles on a card.Powering the unitAs shown in the illustration, connect the included GPE248-120200-Z AC adaptor to the DC IN 12V jack.AC outletDC plugCAUTION• Always use the included GPE248-120200-Z AC adaptor.Use of a different adapter could cause malfunction, fire orelectric shock.• Be sure to use the included GPE248-120200-Z AC adaptorto supply power to this unit. Power cannot be supplied tothis unit by USB.