TASCAM DP-32SD 92 - Quick GuidePlayback and mixingIn this section, we will play back the demo song on the includedSD card.When this unit is purchased new, an SD card with the demosong on it is already inserted in the unit, but we will start byexplaining how to insert an SD card using the procedures below.Preparation1. Insert the included SD card into the SD card slot on the rearpanel. Be careful not to forcibly insert the card in the wrongdirection. Doing so could damage the SD card slot or the SDcard.2. Connect the supplied AC adaptor (GPE248-120200-Z) to theDC IN 12V jack on the rear panel.AC outletDC plugCAUTIONAlways use the included GPE248-120200-Z AC adaptor.Use of a different adapter could cause malfunction, fireor electric shock.3. Connect headphones to the PHONES jack on the frontpanel.Headphones4. Press and hold the STANDBY/ON button for a few secondson the rear panel to turn the power ON. When the unit starts,the Home screen opens on the display.Start-up screenHome screenCAUTION• Do not remove or insert an SD card when the power isON. Always turn the power off (put in standby) beforeremoving or inserting an SD card.• When the power is ON, do not disconnect the power cordor otherwise interrupt the power to the unit. Doing so willcause all settings made since the last time you saved to belost. If the power is interrupted while an SD card is beingaccessed, all recorded songs and data on the card could bedamaged beyond recovery.• Before turning the power ON, minimize the headphonesvolume and the volume on any monitoring systemconnected to this unit.TIPBy connecting an amplifier or powered speakers to the MONITOROUT jacks, you can monitor using speakers.