Tascam DP-32SD Owner's Manual

Also see for DP-32SD: Troubleshooting supplement Schematic diagram

Contents

44 TASCAM DP-32SD7 - Recorder FunctionsIf a stereo track is selected, the displayed track (odd or even)changes each time the SELECT button is pressed, and youcan monitor only the displayed track.4. Use the CURSOR (g/t) buttons to increase/decrease thehorizontal zoom (time) as necessary.Press the CURSOR g button to decrease the horizontalzoom (time), or the CURSOR t button to increase it.You can also use the CURSOR (5/b) buttons to increase/decrease the vertical zoom (audio level).Press the CURSOR 5 button to increase the vertical zoom(audio level), or the CURSOR b button to decrease it.Increasing the zoom makes it easier to cue precisely.5. Use the JOG/DATA dial to locate the cue point.6. After you find the cue point, press the JOG PLAY button toreturn to the Home screen.Jogging while listening to audio1. Use the transport buttons or other locate functions to movethe playback position near the position where you want tocue playback.2. Press the JOG PLAY button to enter jog mode.If in waveform display mode, press the F1 key to switch totimeline display.3. Use the CURSOR (g/t) buttons to increase/decrease thehorizontal zoom (time) as necessary.Press the CURSOR (g) button to decrease the horizontalzoom (time), or the CURSOR (t) button to increase it.Increasing the zoom makes it easier to cue precisely.The jogging sound, which is the sound of a short incrementbeing repeated, can be heard.4. While listening to the jog sound, use the JOG/DATA dial tolocate the cue point.5. After you find the cue point, press the JOG PLAY button toreturn to the Home screen.NOTEThe transport buttons can be used even in jog mode. However,when the timeline is displayed, pressing the PLAY button switchesbetween normal playback and jog playback, and pressing theSTOP button activates jog playback.When in jog mode, you can move in 1/10 frame (1/300 seconds)units. You can also set IN and OUT points with 1/10 frame precision.Repeat playbackUse the repeat playback function to play the same part againand again.The repeat playback interval is the audio between the IN andOUT points.Setting IN/OUT pointsIn addition to setting the repeat playback interval, the IN andOUT points are also used to set track editing intervals and as thepunch-in and punch-out points when automatically punchingin and out. Moreover, these points are used as the start and endpoints of the mixed-down master file when creating a master file.You can set these points when the unit is recording, playing backor stopped.NOTEThe IN and OUT points cannot be set or edited in the followingmodes: repeat playback, auto punch and mastering.ª Adding IN/OUT pointsRegardless of whether the unit is stopped, playing back orrecording, when the recorder is at the desired position, pressand hold the MARK SET button and press the IN or OUT button.The position where you pressed the IN/OUT button is set as theIN/OUT point and the time is shown on the Home screen.ª Locating IN/OUT pointsWhen stopped or playing back, press the IN or OUT button.Using repeat playback1. Set the IN point and OUT points as the start and end pointsof the repeat playback interval, and then return to the Homescreen.2. Press the REPEAT button.The icon appears on the Home screen, and repeatplayback starts.Repeat iconAfter starting from the IN point, when playback reaches theOUT point, it returns to the IN point and continues.Playback continues to repeat between the IN and OUTpoints.3. To end repeat playback, press the REPEAT button, so thatthe icon disappears from the Home screen.Jumpback playbackPress the JUMPBACK (PREVIEW) button during playback tomove back a set number of seconds and restart playback.If you want to hear a passage again during playback, press theJUMPBACK (PREVIEW) button to go back the set number ofseconds and replay that passage.1. When the recorder is stopped, press the MENU button toopen the MENU screen.2. Use the JOG/DATA dial or the CURSOR (5/b/g/t)buttons to select (highlight green) PREFERENCE, and thenpress the F4 (t) button.The PREFERENCE screen opens.