Tascam DR-100MKIII Reference Manual

Also see for DR-100MKIII: Manual

Contents

Tascam DR-100MKIII Reference Manual Manual pdf 12 page image

12 TASCAM DR-100MKIII2 – Names and functions of partsMenu listPress the MENU button to open the MENU screen.The menu items are as follows.Menu item Function PageBROWSE Work with files and folders on the SD card see page 32REC SETTINGFORMAT Set the recording file format see page 21SAMPLE Setting the sampling frequencyFILE TYPE Set the file type see page 21XRI Turn XRI data recording on/off see page 28DUAL REC Set dual recording function see page 27FILE INC Set the recording time interval for automatically dividing (creatingnew) files see page 27AUTO REC Set the auto-recording function see page 25PRE REC Set the pre-recording function see page 26AUTO TONE Set the auto tone function see page 28I/O SETTINGSOURCE Set the input source see page 21A/D FILTER Set the A/D converter filter see page 24DUAL ADC Turn on/off this function that improves S/N performance see page 25LOW CUT Set the low-cut filter see page 23LEVEL CONTROL Set the level control function see page 23MS DECODE Set the mid-side decoding function see page 24PHANTOM VOLT Set the phantom power voltage see page 22PLUG IN POWER Turn plug-in power on/off see page 22OUTPUT ATT Set the output attenuator function see page 44MARK SETTINGAUTO MARK Set the automatic mark function see page 38PEAK MARK Turn the peak mark function on/off see page 39MARK SKIP Set the mark skip mode see page 39POWER/DISPLAYAUTO PWR SAVE Set the automatic power saving function see page 40BATTERY Makes settings related to the built-in and replaceable batteries see page 40BACKLIGHT Set the time the backlight stays lit see page 40BRIGHTNESS Set the backlight brightness see page 40CONTRAST Adjust the contrast see page 40INDICATORS Turn indicators on/off see page 40PEAK LEVEL Set the level meter peak hold function see page 41SYSTEMINFORMATION Shows a variety of information. see page 41DATE/TIME Set the date and time see page 17FILE NAME Set the file name format. see page 36FILE No.RESET Reset the file number. see page 37REMOTE Make connected remote control settings see page 46LANGUAGE Set the language shown on the display see page 16INITIALIZE Restore factory default settings see page 43MEDIA FORMAT Format the SD card see page 43USB STORAGE Switch to USB mass storage device mode see page 45CAUTION• When recording or in recording standby, the MENU screen will not open.• The settings for all menu items are retained even when the unit is turned off (in standby).