Tascam DR-100MKIII Reference Manual

Also see for DR-100MKIII: Manual

Contents

Tascam DR-100MKIII Reference Manual Manual pdf 8 page image

8 TASCAM DR-100MKIII2 – Names and functions of partsRight sidec Battery compartment (AA batteries)Install batteries (2 AA) in this compartment to power theunit. (See “Using AA batteries” on page 14.)v SD card slotInsert an SD card here.b Input level knobUse this to adjust the input signal volume.Bottomn Tripod mounting threads (1/4-inch)Use to attach this unit to a tripod.CAUTION• Securely tighten all the screws on the tripod or microphonestand to prevent the unit from falling off.• When using this unit attached to a tripod or microphonestand, place it on a level surface.• Some tripods have different screw specifications that makedirect connection impossible. Use a commercially-availableadapter with such tripods.• Screws longer than 4.5 mm cannot be attached.m REC indicatorThis functions in the same way as the REC indicator on thetop of the unit.Home ScreenStopped/playingRecording/recording standby1 Input sourceThis shows the input source set with the I/O SETTINGscreen SOURCE item. (See “Setting recording input sources”on page 21.)UNI MIC (built-in directional mic) inputOMNI MIC (built-in omnidirectional mic)inputMIC/LINE IN jack connected mic inputMIC/LINE IN jack connected line level inputEXT IN jack connected mic inputEXT IN jack connected line level inputDIGITAL IN jack connected digital input2 Input channel indicator (ST/L/R/MIX)This shows the REC SETTING screen FILE TYPE item setting.(See “Recording in mono (file type setting)” on page 21.)Stereo input/stereo fileLeft channel input/mono fileRight channel input/mono fileL-R mix input/mono file3 Low cut filter on/off statusThis icon shows whether the low cut filter is on or off. (See“Setting the low-cut filter” on page 23.)Low cut filter offLow cut filter on (40 Hz)Low cut filter on (80 Hz)Low cut filter on (120 Hz)Low cut filter on (220 Hz)