Tascam DR-100MKIII Reference Manual

Also see for DR-100MKIII: Manual

Contents

Tascam DR-100MKIII Reference Manual Manual pdf 50 page image

50 TASCAM DR-100MKIII13 – SpecificationsRatings8 Recording mediaSD card (64 MB−2 GB)SDHC card (4 GB−32 GB)SDXC card (48 GB–128 GB)8 Recording/playback formatsWAV (BWF): 44.1/48/88.2/96/176.4/192kHz, 16/24-bitMP3: 44.1/48kHz, 128/192/256/320kbps8 Number of channels2 channels (stereo)Input/output ratingsAnalog audio input and output ratings8 MIC/LINE IN jacks (XLR support phantom power)Connectors:XLR-3-31(1: GND, 2: HOT, 3: COLD)6.3mm (1/4") standard TRS jacks(Tip: HOT, Ring: COLD, Sleeve: GND)When MIC input source selectedMaximum input level: +2 dBu (PAD on)Minimum input level: -70.5 dBu (PAD off )Input impedancei XLR input: 2 kΩ or morei TRS input: 20 kΩ or moreWhen LINE input source selectedMaximum input level: +24 dBuNominal input level: +4 dBuInput impedance: 20 kΩ or more8 EXT IN jack (can provide plug-in power)Connector: 3.5mm (1/8”) stereo mini jackWhen EXT MIC input source selectedMaximum input level: -2.8 dBu (PAD on)Minimum input level: -62.8 dBu (PAD off )Input impedance: 50 kΩ or moreWhen EXT LINE input source selectedMaximum input level: +6 dBVNominal input level: −10 dBVInput impedance: 2 kΩ or more8 LINE OUT jackConnector: 3.5mm (1/8”) stereo mini jackOutput impedance: 200 ΩWhen LINE input source selectedNominal output level: -14 dBVMaximum output level: +6 dBVAt other timesNominal output level: -10 dBVMaximum output level: +6 dBV8 (headphone) jackConnector: 3.5mm (1/8”) stereo mini jackMaximum output: 40mW + 40mW (when headphonesconnected, into 32 Ω load)8 Built-in speaker0.4W (mono)Digital input8 DIGITAL IN connectorConnector:3.5mm (1/8”) TRS jack (using dedicated conversioncable)Format: IEC60958-3 (S/PDIF)Control input/output ratings8 USB portConnector type: Micro-BFormat: USB 2.0 HIGH SPEED mass storage class8 REMOTE jackConnector: 2.5mm (3/32") TRS jackAudio performance8 Frequency responseMIC/LINE IN (MIC, PAD On) to LINE OUTMIC/LINE IN (LINE) to LINE OUTEXT IN (MIC, PAD On) to LINE OUTEXT IN (LINE) to LINE OUT20 Hz−20 kHz +0.5 dB/−1 dB(44.1/48kHz sampling frequency, JEITA)20 Hz−40 kHz +0.5 dB/−2 dB(88.2/96kHz sampling frequency, JEITA)20 Hz−80 kHz +0.5 dB/−4 dB(176.4kHz/192kHz sampling frequency, JEITA)8 DistortionMIC/LINE IN (MIC, PAD On) to LINE OUTMIC/LINE IN (LINE, +20dBu In) to LINE OUTEXT IN (MIC, PAD On) to LINE OUTEXT IN (LINE) to LINE OUT0.007% or less(44.1/48/88.2/96/176.4/192kHz sampling frequency, JEITA)8 S/N ratioMIC/LINE IN (MIC, PAD On) to LINE OUTMIC/LINE IN (LINE) to LINE OUTEXT IN (MIC, PAD On) to LINE OUTEXT IN (LINE) to LINE OUT102 dB or more(44.1/48/88.2/96/176.4/192kHz sampling frequency, JEITA)8 Equivalent input noise (EIN)124 dBu or lowerNote: based on JEITA CP-2150

/ 52

Related manuals for Tascam DR-100MKIII