Tascam DR-100MKIII Reference Manual

Also see for DR-100MKIII: Manual

Contents

Tascam DR-100MKIII Reference Manual Manual pdf 46 page image

46 TASCAM DR-100MKIII10 – Using the REMOTE jackThis unit has a REMOTE jack.Connect a TASCAM RC-3F footswitch or TASCAM RC-10 wiredremote control (both sold separately) here to enable remoteoperation of this unit.Using a remote control (TASCAMRC-10)TASCAM RC-10 (sold separately)Setting up a remote control1. Select the SYSTEM screen REMOTE item to open the REMOTEscreen. (See “Basic menu operation procedures” on page10.)2. Set the TYPE item to RC-10(default).Function button operationsFunction buttonF1 F2 F3 F4INPUT L VOL+ INPUT L VOL- INPUT VOL+ INPUT VOL-Using the remote controlPress the function (F1–F4) buttons on the wired remote controlto use the operations assigned to them on the REMOTE screen.Using a footswitch (TASCAM RC-3F)TASCAM RC-3F (sold separately)Setting up the footswitch1. Select the SYSTEM screen REMOTE item to open the REMOTEscreen. (See “Basic menu operation procedures” on page10.)2. Set the TYPE item to RC-3F (default: RC-10).3. Select the MODE item and set the footswitch mode.Options: PLAY (default), REC1, REC2, MINUTESMODE FootswitchL C RPLAY . 7/9 /REC1 8 0/9 FILE INCREC2 8 0/9 MARK SETMINUTES * 7/9 VSAON/OFF* During playback to move back a 3 seconds.Using the footswitchPress the pedals of the footswitch to use the operationsassigned to them by the REMOTE screen MODE item.