Tascam DR-100MKIII Reference Manual

Also see for DR-100MKIII: Manual

Contents

Tascam DR-100MKIII Reference Manual Manual pdf 41 page image

TASCAM DR-100MKIII 418 – Settings and InformationSetting the peak level function8 Setting the peak level valueSet the peak level at which the icon appears and the PEAKlevel indicator lights.1. Select the PEAK LEVEL item, and open the PEAK LEVELscreen. (See “Basic menu operation procedures” on page10.)2. Select the LEVEL item and set the peak level value.Options: -0.1 dB, -0.5 dB, -1.0 dB, -2.0 dB (default)8 Setting the peak hold timeSet the level meter peak hold time.1. Select the PEAK LEVEL item, and open the PEAK LEVELscreen. (See “Basic menu operation procedures” on page10.)2. Select the HOLD item, and set the level meter peak hold time.Options: OFF, 1 sec (default), HOLD (always show)8 Clearing held peak levelsWhen HOLD is selected on the HOLD screen, peak indicators willremain until cleared.When the Home Screen is open, press and hold the Fn button toclear held peaks.Viewing informationUse the INFORMATION screen to view various types of infor-mation about the unit.Follow the procedures below to view the INFORMATION screen.1. Select the SYSTEM screen INFORMATION item to open theInformation Screen. (See “Basic menu operation procedures”on page 10.)The Information Screen has four pages. The FILE pageopens first.2. Turn the wheel to change the page shown.FILE pageShows information about the currently loaded audio fileCARD pageShows the use status of the currently loaded SD cardFirmware pageShows the unit’s system firmware version.XRI pageThis shows XRI data recorded in WAV (BWF) files.File information pageThe FILE page shows information about the currently loadedaudio file.8 FILEThe file name8 FORMATShows the audio file type.For WAV files, this shows the bit length and sampling frequency(Hz).For MP3 files, this shows the bit rate (kbps) and samplingfrequency (Hz).8 CHANNELShows if it is stereo or mono.8 DATEShows the file creation date.8 TIMEShows the file creation time.