Tascam DR-100MKIII Reference Manual

Also see for DR-100MKIII: Manual

Contents

Tascam DR-100MKIII Reference Manual Manual pdf 19 page image

TASCAM DR-100MKIII 193 – PreparationUsing the built-in speaker for playbackSet the (speaker) switch to ON to listen to playback from thebuilt-in speaker.NOTEEven if the (speaker) switch is set to ON, the speaker willnot output sound when the unit is recording, in recordingstandby or connected to headphones.Connecting monitoring equipmentTo listen with an external monitoring system (powered monitorspeakers or an amplifier and speakers), connect it to the LINEOUT jack.To listen with headphones, connect them to the (headphone)jack.Powered monitor speakers oramplifier and speakersHeadphonesAdjusting playback volumeUse the (headphone/speaker) LEVEL control to adjust thevolume output from the built-in speaker and (headphone)jack. (See “Restricting the headphone output level.” on page44.)Connecting camerasWhen recording video on a camera, this unit can simultaneouslyrecord the same sound as the camera. Connect this unit and thecamera as follows to input sound into the camera.DSLR cameraExternal mic input jackNOTEWhen connected to a camera, the line output level can beattenuated 30 dB. (See “Restricting the line output level” onpage 44.)