Tascam DR-100MKIII Reference Manual

Also see for DR-100MKIII: Manual

Contents

Tascam DR-100MKIII Reference Manual Manual pdf 30 page image

30 TASCAM DR-100MKIII5 – PlaybackPlaying recordingsWhen the Home Screen is open and playback is stopped orpaused, press the PLAY/PAUSE [y/9] button to start playback.Pausing playbackWhen the Home Screen is open, press the PLAY/PAUSE [y/9]or STOP [8] button to pause.Press the PLAY/PAUSE [y/9] button again to resume playback.Stopping playbackWhen the Home Screen is open, press the STOP [8] buttonwhile paused to return to the beginning of the file.Searching backward and forwardWhen the Home Screen is open and a track is playing backor stopped, press and hold the . or / button to searchforward or backward.Release the button to stop again or resume playback.NOTEPress and hold the . or / button to accelerate thesearch speed.Changing the playback positionTurn the wheel while the Home Screen is open when playing,paused or stopped to move the playback position.Stop turning the wheel to stop again or resume playback.Selecting files for playback (skipping)When the Home Screen is open, press the . and / buttonsto select the file for playback.Press the . button when in the middle of a file to return tothe beginning of that file. Press the . button when at thebeginning of a file to skip to the beginning of the previous file.If you press the / button when located at the beginning ormiddle of a file, the playback position will skip to the beginningof the next file.NOTEYou can also use the browse screen to select files forplayback. (See “6 – Working with Files and Folders” on page32.)Repeat playback (LOOP PLAY)With this function, you can continuously repeat (loop) theplayback of an interval between two points.1. Press the Fn button to open the FUNCTION screen, and selectthe LOOP PLAY item. (See “Basic menu operation procedures”on page 10.)2. Turn the loop playback function on.Options: OFF (default), ON3. Loop playback mode will be enabled when you return to theHome Screen.IN appears in the loop playback status area.4. During playback or when paused, press the ENTER/MARKbutton to set the IN (starting) point.5. Press the ENTER/MARK button again to set the OUT(ending) point.