Tascam DR-100MKIII Reference Manual

Also see for DR-100MKIII: Manual

Contents

Tascam DR-100MKIII Reference Manual Manual pdf 39 page image

TASCAM DR-100MKIII 397 – Mark functionsAdding marks at peak levelsMarks can be added automatically when input signals exceedthe peak level during recording. Use this to find when the peaklevel was exceeded after recording.1. Select the PEAK MARK item on the MARK SETTING screen. (See“Basic menu operation procedures” on page 10.)2. Turn the peak mark function on/off.Options: OFF (default), ONNOTE• These marks are added two seconds before the peak levelwas exceeded.• After a peak mark is added, another peak mark will not beadded until at least 10 seconds have passed.Moving between marks (markskipping)When stopped, paused or playing back, press the . or /button while pressing the ENTER/MARK button to move (skip)to the previous or next mark. When skipping, the mark nameappears in a pull-up at the bottom of the display.Since there are multiple mark types, you can choose which typeto use when skipping.NOTEYou cannot move to a mark in a different file.1. Select the MARK SETTING screen MARK SKIP item to open theMARK SKIP screen. (See “Basic menu operation procedures”on page 10.)2. Set the mark skip mode.Options: ALL (default), MARK, LEVEL, TIME, PEAK, DIN ERR,BOFDeleting marksYou can delete marks that have been added by this unit whenstopped or paused.1. You can skip to marks that you want to delete when stoppedor paused. (See “Moving between marks (mark skipping)” onpage 39.)2. Press the ENTER/MARK button to open the confirmationscreen.3. Select YES to continue execution or select NO to cancel. Then,press the ENTER/MARK button.