Tascam DR-100MKIII Reference Manual

Also see for DR-100MKIII: Manual

Contents

Tascam DR-100MKIII Reference Manual Manual pdf 31 page image

TASCAM DR-100MKIII 315 – Playback6. Press the ENTER/MARK button again to clear the IN(starting) and OUT (ending) points.NOTE• When in loop playback mode, the mark function is disabled.• If neither IN or OUT points are set, the entire file will beplayed repeatedly from start to finish in single track loopplayback mode.• You cannot set the IN and OUT points in different files.• If you select a different file, the IN and OUT point settingswill be cleared.Changing the speed of playback (VSAplayback)The unit features a VSA (Variable Speed Audition) playbackfunction that changes the playback speed without changing thepitch.CAUTIONThe VSA function cannot be used with files recordedwith sampling frequencies of 88.2, 96, 176.4 or 192 kHz.However, the playback speed can still be changed in thesecases.1. Press the Fn button to open the FUNCTION screen, and selectthe VSA PLAY item. (See “Basic menu operation procedures”on page 10.)2. Press the ENTER/MARK button to open the VSA PLAYscreen.3. Use the VSA item to turn the VSA function on.Options: OFF (default), ON4. Use the SPEED item to set the playback speed.Options: ×0.5 – ×2.0 (in ×0.1 increments, ×1.0 default)