90 Commissioning WAGO-I/O-SYSTEM 750750-494 3-Phase Power Measurement ModuleManualVersion 1.2.0The Overview view displays the measured values of all three phasescontinuously. These are:• A sum view (Phase L1-L3) with active, reactive and apparent power, powerfactor PF, active, reactive and apparent energy.• 4-quadrant display per phase• Rotating field of the 3-phase supply network• Current, voltage Lx-N, active, reactive and apparent power, cos phi, Powerfactor PF and frequency per phase. Overcurrent, under and overvoltage areidentified as a red square, if not present as a green one.Change of the Measuring Units!Specify the prefixes of the measuring units by selecting Home > Settings >Application. See section "Configuration with WAGO-I/O-CHECK" >"Application" Tab.The units can only be changed in the lists with the same physical variables. Forlists with different variables, base units are always used!Figure 27: Measured Values ‒ Overview
