98 Commissioning WAGO-I/O-SYSTEM 750750-494 3-Phase Power Measurement ModuleManualVersion 1.2.0On the Measurement Recording view, 3 measured variables are represented inchronological sequence. You can select the measured variables you want to see inthe 3 drop-down lists.Figure 35: Measured Values ‒ RecordingIn general, you can select in the 3 waveforms whether:• The samples are displayed over a certain period of time (with ).or• A certain number of samples is displayed (with ).You can then enter the duration by start and end time or the number of samples. Inboth cases, the measurement interval, i.e. sample rate, can also be selected from250 to 300,000 ms.Clicking the arrow, the [Start] button generates a drop-down list in which you canselect "No Export". By doing this, no export CSV file is generated.If you click [Start] as usual, a "Save" window opens in which you can specify thestorage location for the CSV file. After you have specified the storage location themeasurement starts. Use [Stop] to stop the measurement prematurely. Forexamples of CSV files, see section "Appendix".Use the mouse wheel to zoom in and out within the three graphic waveforms.Hold down the left mouse button to move the displayed range.Click again to follow the current waveform.Pos : 100 /Dokumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
