92 Commissioning WAGO-I/O-SYSTEM 750750-494 3-Phase Power Measurement ModuleManualVersion 1.2.0Currents/Voltages displays all currents, voltages, phase angles and frequencies,including min., max., average and peak values.Note: Peak values are only displayed for the phase which was selected for peakvalue measurement. See section "Configuration with WAGO-I/O-CHECK" > "I/Omodule" Tab.Overcurrent, under and overvoltage are identified as a red square, if not present asa green one.• Current• Voltage Lx-N• Phase-to-phase voltage• Phase angle• FrequencyFigure 29: Measured Values ‒ Currents and Voltages