FONT SUPPORT AND SELECTIONset to match pitch, if spacing is set to fixed, and fontselection occurs.• The predefined table (refer to the “PCL font and IBM GFID”appendix) is examined and a selection occurs when a matchis made. Horizontal Motion Index (HMI) is set to matchpitch, if spacing is set to fixed, and font selection occurs.• To make sure correct code point mapping is selected,Symbol Set is matched to the active translate table, asfollows:— If the GFID is below 400, fixed spacing is selected. Afont pitch, style, and stroke weight are specified (refer toTable 4-12). The Horizontal Motion Index (HMI) is set tomatch pitch, and font selection is made.Specifically, the mapping involves the following stepsbefore font selection is completed:– Pitch is selected.– Style is set to upright.– Stroke Weight is set to medium.– HMI is set to match pitch.— If the GFID is above 400, a typographic font is selected.The point size and typeface are taken from the GFID,divided in parts, using the following algorithm:GFID number = XXXYYXXX = Point SizeYY = Typeface ID.Selecting COR fontsThe font width for the GFID is mapped to a related COR widthaccording to the COR font mapping (refer to Table 4-4). Themapping involves the following steps before font selection iscompleted:• Pitch is selected.• Lineprinter font is selected.• Style is set to upright.• Stroke Weight is set to medium.• HMI is set to match pitch.4-6 XEROX MRP FAMILY COAX COMMAND REFERENCE
