NOTICESOperational safetyYour Xerox equipment and supplies are designed and tested tomeet strict safety requirements. These requirements includesafety agency examination, approval, and compliance withestablished environmental standards.Follow these notes to ensure safe operation of your equipment.Do thisAlways connect equipment to a properly grounded power sourcereceptacle. If in doubt, have the receptacle checked by aqualified electrician.WARNING: Improper connection of the equipment groundingconductor can result in electrical shock.Always place equipment on a floor with adequate strength forthe weight of the machine.Always have your Xerox service representative move or relocatethe equipment.Always use materials and supplies specifically designed for yourXerox equipment.WARNING: Use of unsuitable materials may result in poorperformance and can possibly create a hazardous condition.Always use a Xerox specified cordset with the Equipment LeakageCircuit Interrupter/Residual Current Device (ELCI/RCD).Do not do thisNever use an extension cord with the ELCI/RCD.Never use the ELCI/RCD where water may enter the casing.Never attempt any maintenance function that is not specificallydescribed in your Xerox MRP family documentations.Never remove any covers or guards that are fastened with screwsunless otherwise instructed. There are no operator-serviceableareas within these covers.Never override or “cheat” electrical or mechanical devices.Never operate the equipment if you notice unusual noises orodors. Disconnect the power cord from the power sourcereceptacle and call Xerox service to correct the problem.U.S. only: If you need any additional safety informationconcerning the equipment or if you need Xerox suppliedmaterials, call the following toll-free number: 1-800-828-6571.XEROX MRP FAMILY COAX COMMAND REFERENCE vii
