CONFIGURATION AND RESOURCE UTILITY (MVS)Create Configuration DescriptionThe Xerox Resource Utility, Create Configuration Descriptionscreen allows you to create configuration descriptions for theinternal interface card on the host.The configuration description object or file converts the valuesselected from the screen to the appropriate Function Selectionvia Line (FSL). The Function Selection via Line (FSL) is createdwhen the Create Configuration Description screen is exited andstored in XMRPV1R2M1CFGDLIB partitioned data set (PDS).Each time the Create Configuration Description command isexecuted, the FSL is recreated. There is an option from theCreate Configuration Screen to download the description to theprinter.To create this Configuration Description screen, enter on theselection line or command line:TSO EXEC ‘XMRPV1R2M1CLIST(CRTCFGD)’Press the Enter key.Refer to the “Clist Code Listings” section in this chapter foradditional information.1st screen The Create Configuration Description first screen displays:--------------------XEROX RESOURCE UTILITY Ver1.2.1-----------------------------------------CREATE CONFIGURATIONDESCRIPTION---------------------------------(Value 'NONE' does not create FSL for theCFGD---------------NAME OF CONFIG DESCRIPTION = = => NAMELINES PER INCH = = => 6 NONE,0,3,4,6,8CHARACTERS PER INCH = = => 10 NONE,10,12,15,16,20,27LINE SPACING = = => SINGLE NONE,SINGLE, DOUBLEFORM LENGTH = = => 62 NONE,0 to 255MAXIMUM PRINT POSITION = = => 132 NONE,0 to 255CASE = = => DUAL NONE,MONO,DUALPAGE FORMAT = = => PORT NONE,PORT,LAND,CORPAPER PATH = = => TRAY 1NONE,TRAY1,TRAY2,TRAY3,TRAY4,TRAY5,MIDDLE,UPPER,LOWER,MAN-PAP,MAN-ENVPAPER SIZE = = => LETTERNONE,LETTER,LEGAL,A4,EXEC,MON,BUS,DL,C5,A3,LEDGERLINE OVERFLOW OPTION = = => TRUNCATE NONE,WRAP,TRUNCATEDUPLEX PRINTING = = => SIMPLEX NONE,SIMPLEX,LONG,SHORTFORM FEED BEFORE LOCAL CPY = = => NO NONE,YES,NThe screen has three columns. Column 1 shows the various FSLcommands. Column 2 is where you enter your choice ofparameter values found in column 3. Default values aredisplayed in column 2.N Note: Although the screen displays 16 in the CharactersPer Inch field, the printer uses 16.7.Remember You enter your options in the Default parameter fields (column2) and press the Enter key to execute the command.There are two validated fields in the Create ConfigurationDescription screen:• Name of Configuration DescriptionXEROX MRP FAMILY COAX COMMAND REFERENCE 7-19
