FUNCTION SELECTION VIA LINE (FSL) COMMANDSY33—Non-SCS, Automatic Function at End of Job@Y33, n@Implements an IBM RPQ and takes effect as soon as thecommand is received. This function determines the printposition after the print buffer is completed or after an end ofmessage is received. Settings different from the factory default isNOT recommended.n Values for n are:0* A New Line (NL) is automaticallyexecuted when the printing of a buffer iscompleted unless the last commandexecuted was a Form Feed (FF), New Line(NL), or a Carriage Return (CR).1 A Form Feed is automatically executedwhen the printing of a buffer iscompleted, unless the last commandexecuted was a FF.If n = 0, (default) is selected, on completion of the print buffer,an Automatic New Line is performed unless the last commandexecuted was a Form Feed, or the last print position is atposition 1. If Form Feed is the last character in the buffer, theend of printer buffer options (Y31) is checked.If n = 1 is selected, on completion of the print buffer, anAutomatic Form Feed is performed unless Form Feed was the lastcommand in the buffer. The printer is set at print position 1 ofthe first line of the next page.This option only affects NON SCS printing, and corresponds withthe IBM 3268 RPQ SC9507, and the IBM 3287 RPQ SC3740.Example @Y33, 1@ sets the printer to automatically issue a FF at the end ofa print buffer.End of BufferoOFFONPrint position1 2 3Page boundaryNext formPresent formSame print lineNext print lineNext print lineLast print lineMPP+13-34 XEROX MRP FAMILY COAX COMMAND REFERENCE
