FUNCTION SELECTION VIA LINE (FSL) COMMANDSOnly n1 = 0 or 1 is supported for envelope feeder. (Refer torelated FSL function Y11.)If n1 is greater than 3 (n1>3), then FSL Y62—Setup for IBM-defined Strings command is not used.Example @Y10, 1@ selects landscape format with no scaling.Y11—Set Default Paper Path@Y11, , {n2}@Selects the default input paper tray, or links an input tray to anoutput paper tray.Utility FSLY11, n1PCL parameter toEsc&I#H4220/MRP4230/MRPN/A N/A 0 Current Tray Not SupportedTRAY1 2 1 Paper Tray Tray 1TRAY2 5 3 Manual-Envelope Tray 2TRAY3 3 4 Lower Tray Tray 3TRAY4 6 5 Paper Deck Tray 4TRAY5 4 2 Manual-Paper Tray 5**N/A N/A 6 Envelope Feeder Tray 5**Utility FSLY11, n1PCL parameter toEsc&I#H4215/MRP and4219/MRPN/A N/A 0 Current Tray Current TrayUPPER 2 1 Paper Tray Upper TrayMIDDLE 1 7 Undefined Middle TrayLOWER 3 4 Lower Tray Lower TrayMAN-PAP 4 2 Manual-Paper Manual Tray-PaperMAN-ENV 5 3 Manual-Envelope Manual Tray-EnvelopeN/A N/A 6 Envelope Feeder Not Supported** Cannot be changed. Other printer trays can be remapped atthe user interface.If the code is placed as the first printable character on the page,the changed format is effective as soon as the printer receivesthe command. If the command is placed at any other positionon the page, the change is effective on the next page.The n1 parameter produces a PCL5 sequence that selects theproper input paper tray. The table provides a cross reference3-20 XEROX MRP FAMILY COAX COMMAND REFERENCE
