FUNCTION SELECTION VIA LINE (FSL) COMMANDSY14—Enable Graphic Option@Y14, n@Enables connection of IBM 3812 Page Printer using the ida 3812software. It also enables the use of ida 820 Advanced FuntionPrinting (AFP) software package.n1 Values for n1 are:0 Disable Graphics1* Enable GraphicsNo guarantee for vertical formatting is given if n1= 0. If n1 = 1 is selected, data exceeding themaximum print position is lost.Refer to the “Helpful hints” appendix for recommended settingsto obtain a specific IBM printer emulation.Refer also to the “Printer Type and Character Set,” “Features,”and “PS Characteristics” functions in table D-2 of the “PrinterOutput Area” section in the “Coax communications buffer”appendix.Remember It is important not to set this function during normal operation.Once programmed, the new value should be stored.Y19—Set Simplex / Duplex@Y19, n@Selects duplex printing.Printing on both sides of a paper is enabled with long-edgebinding or short-edge binding (tumble).n Values for n are:0 Simplex printing (printing on one side ofthe paper)1 Long-edge binding duplex2 Short-edge binding duplexLong-edge and short-edge bindings are printedin both portrait and landscape.Orientation of the printing (landscape or portrait) should beselected in the software controlling the printing, for example,word processing programs.Do not use a different page format on the front and the backside of a paper or the binding edge might have an unpredictableresult.To make sure that all pages have been ejected while printing induplex, set FSL function Y19 to “0“ simplex printing at the end of3-24 XEROX MRP FAMILY COAX COMMAND REFERENCE
