1 Safety Notes4 Wide Format Copy System User GuideMaintenance InformationDo not attempt any maintenance procedure that is not specifically described in the documentationthat is supplied with your copier/printer.- Do not use aerosol cleaners. The use of cleaners that are not approved may cause poorperformance of the equipment, and could create a dangerous condition.- Use supplies and cleaning materials only as directed in this manual. Keep all of thesematerials out of the reach of children.- Do not remove covers or guards that are fastened with screws. There are no parts behindthese covers that you can maintain or service.- Do not perform any maintenance procedures unless you have been trained to do them by anAuthorized Local Dealer or unless a procedure is specifically described in the user manuals.Ozone Safety InformationThis product will produce ozone during normal operation. The ozone produced is heavier than airand is dependent on copy volume. Providing the correct environmental parameters as specifiedin the Xerox installation procedure will ensure that the concentration levels meet safe limits.If you need additional information about ozone, please request the Xerox publication Ozone bycalling 1-800-828-6571 in the United States and Canada. In other markets please contact yourAuthorized Local Dealer or Service Provider.For ConsumablesStore all consumables in accordance with the instructions given on the package or container.• Keep all consumables away from the reach of children.• Never throw toner, toner cartridges, or toner containers into an open flameRadio Frequency EmissionsUnited States, Canada, Europe, Australia/New Zealand:NOTE: This equipment has been tested and found to comply with the limits for a class A digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference when the equipment is operated in a commercialenvironment. This equipment generates, uses, and can radiate radio frequency energy and, if notinstalled and used in accordance with the instruction manual, may cause harmful interference toradio communications. Operation of this equipment in a residential area is likely to cause harmfulinterference, in which case users will be required to correct the interference at their own expense.Changes and modifications to this equipment not specifically approved by Xerox/Fuji Xerox mayvoid the user’s authority to operate this equipment.Shielded interface cables must be used with this equipment to maintain compliance with FCCregulations in the United States and the Radio Communications Act 1992 in Australia/NewZealand as applicable.