Xerox 5101 User Manual

Also see for 6279: User guide Safety guide Quick guide Printer user guide

Contents

Xerox 5101 User Manual Manual pdf 66 page image

5 Making Copies60 Wide Format Copy System User GuideNOTE: When scanning to print, the copy is made using the current Printer processing defaultsincluding margins. If the image being scanned is the same size as the media being used,set the margins to 0 (zero) to prevent the image from being clipped or select a largermedia size.To make a copy using the default document settings:1. Insert the original document face down and centered on the Document Feed-in Trayof the Scan System.NOTE: If the document is not exactly centered and the AUTOCENTER feature is enabled, theScan System will automatically correct the problem electronically. The resulting imagewill still be correctly positioned on the output media. If AUTOWIDTH/AUTOCENTER isdisabled, you will need to carefully center the document when inserting it. Refer to“Controlling the scan” on the previous page. AUTOWIDTH/AUTOCENTER is notavailable in the PRODUCTIVITY mode, requiring the user to manually align thedocument within the appropriate document size guidelines on the Feed-in Tray.2. Gently move the document forward until the lead edge engages the feed rolls. TheScan System transports the document to the starting position. It then scans thedocument. The resulting image is electronically sent to the Printer and your copy isprinted.NOTE: If AUTOSCAN is disabled, you will need to press the Start key to begin the scan. Referto “Controlling the scan” on the previous page.NOTE: If the PRODUCTIVITY mode is enabled the document will start scanning immediately. Ifthe PRODUCTIVITY mode is not enabled, the document will pre-scan a small distancethen reverse itself before starting the complete scan.3. When the document is returned to the READY position, do one of the following:• Pull the document to remove it. Lift the Thick Document Lever to remove fragileor thick documents.• Press the Start key on the Scan System Control Panel to scan the documentagain.NOTE: If DOCUMENT RETURN is set to REAR, the document is delivered to the rear Stacker.Some documents exit to the rear Stacker regardless of the DOCUMENT RETURNsetting. Refer to “Controlling the scan” on the previous page.Making a copy the same size as the original document1. Set the Media Selection Source to Auto. The Auto indicator lamp illuminates. Thissetting allows the Wide Format Copy System to automatically select the availablemedia roll that best fits the image width.NOTE: If the correct media size is not loaded, the next larger size will be used.2. Select the Media Selection, Type. The default setting is Bond.3. Set the Media Selection, Output Format to Synchro. This setting cuts the media tothe same length as the original document.4. Set Reduce/Enlarge to Preset. If the size is not already set to 100%, use thePrevious and Next keys to select a reduction and press the Enter key.