10 Main MenuWide Format Copy System User Guide 101LocalizationThe LOCALIZATION option of the CONFIGURATION menu sets the language in whichmessages are displayed. It also controls whether measurements are displayed in English ormetric units.To set the display language or display units:1. Press the Menu key. The MAIN MENU screen is displayed.2. Press the Enter key to select CONFIGURATION. The CONFIGURATION menuscreen is displayed.3. Press the Enter key to select LOCALIZATION. The LOCALIZATION screen isdisplayed. Below is an example of the LOCALIZATION screen.LOCALIZATIONLANGUAGE:DISPLAY UNITS:ENGLISHLocalization Screen4. Press the Previous or Next key to highlight LANGUAGE or DISPLAY UNITS.5. Press the Enter key to select the highlighted option.6. Press the Previous or Next key to highlight the desired setting for the option.The choices for LANGUAGE are ENGLISH, SPANISH, FRENCH, ITALIAN,GERMAN, RUSSIAN, or PORTUGUESE. ENGLISH is the default setting.The choices for DISPLAY UNITS are INCHES or MM (MILLIMETERS). INCHES isthe default setting.7. Press the Enter key to select the highlighted setting.8. Repeat steps 4 through 6 to change the remaining setting, if desired.9. Press the Exit key to return to the CONFIGURATION menu screen.Control PanelThe CONTROL PANEL option of the CONFIGURATION menu controls whether the beeper isused for the key click and invalid entry beeps. It also allows selection of the font display style andthe default mode of operation for the Wide Format Copy System.To set the beeper, text style or default operating mode:1. Press the Menu key. The MAIN MENU screen is displayed.2. Press the Enter key to select CONFIGURATION. The CONFIGURATION menuscreen is displayed.3. Press the Next key to select CONTROL PANEL.4. Press the Enter key to select CONTROL PANEL. The CONTROL PANEL screen isdisplayed. Below is an example of the CONTROL PANEL screen.
