10 Main MenuWide Format Copy System User Guide 131Scanner Faults (Count)Select the SCANNER FAULTS (COUNT) option to view the last cleared faults.To run the SCANNER FAULTS (COUNTS) diagnostic:1. Press the Menu key. The MAIN MENU screen is displayed.2. Press the Next key until DIAGNOSTICS is highlighted.3. Press the Enter key to select DIAGNOSTICS. The DIAGNOSTICS menu screen isdisplayed.4. Press the Next key until SCANNER DIAGNOSTICS is displayed.5. Press the Enter key to select SCANNER DIAGNOSTICS. The SCANNERDIAGNOSTICS menu screen is displayed.6. Press the Next key until SCANNER FAULTS (COUNTS) is highlighted.7. Press the Enter key to select SCANNER FAULTS (COUNTS). The SCANNERFAULTS (COUNTS) screen is displayed.The first line of the display contains the value of the internal Scanner Reliability Meterreading when the log was last cleared. If the log has never been cleared, the value isset to zero. This line scrolls with the log data.The second and third lines contain the log entry information in columnar format. Thefirst column indicates the log entry number. The second column indicates the faultcode recorded in the log. The third column is the value of the internal ScannerUsage Meter at the time the fault was detected.Below is an example of the SCANNER FAULTS (COUNTS) screen.SCANNER FAULTS (COUNTS)LAST CLEARED: 200101 01-02 247602 01-03 2402Scanner Faults (Counts) Screen8. Use the Previous or Next key to scroll through the listing.The entries are presented three to a screen. You can view all valid entries in theScanner Fault Log from this screen. Empty log entries are not displayed.9. When finished viewing the fault data, press the Exit key to return to the SCANNERDIAGNOSTICS menu screen.Clear Scanner Fault LogThe CLEAR SCANNER FAULT LOG option is for use by the Customer Service Engineer onlyand requires the entry of the diagnostic password. It allows the Customer Service Engineer toerase the contents of the Scanner Fault Log.
