10 Main MenuWide Format Copy System User Guide 123NOTE: The valid range for passwords is 0 - 65535. If the existing password or an invalidpassword is entered, an error message will be displayed. The new password must beentered again.8. Press the Enter key to confirm the new password. The CHANGE PASSWORDscreen will instruct you to re-enter the new password.CHANGE PASSWORDRE-ENTER NEW PASSWORD:Change Password – Re-Enter Password Screen9. Use the numeric keypad to re-enter the new password. The password will display asasterisks.10. Press the Enter key to confirm the re-entry. You will be returned to the SYSTEMADMINISTRATION menu screen. The new password is now effective. The oldpassword is no longer valid.Security SettingsScan-to-FTP: Scanned images can be transferred to 16 remote FTP destinations. The scannedimages are not stored on the Controller’s hard drive. The FTP feature is located on the SampleMode screen.Scan-to-Net: At most installations, users have the ability to recall the last image scanned (thatwas not sent to an FTP destination) and all the settings associated with that image. The recalledimage can then be printed without the need to scan from the original document.Security concerns at certain installations, however, might require that the image recall feature bedisabled. The SECURITY SETTINGS option of the System Administration menu allows thesystem administrator to enable or disable the image recall feature. The default setting isENABLED.To enable/disable the image recall feature:1. Select the Menu key.2. Access the SYSTEM ADMINISTRATION menu.3. Press the Next key until SECURITY SETTINGS is highlighted.4. Press the Enter key to select SECURITY SETTINGS. The SECURITY SETTINGSscreen is displayed.SECURITY SE TTINGSIMAGE RECALL: ENABLEDSecurity Settings Screen
