Wide Format Copy System User Guide 678 Special Features KeysSpecial features keysThere are many enhanced features for making copies that meet special needs. The keys thatcontrol these features are on the right side of the Scan System Control Panel.To enable a feature, press the applicable key. If the feature has an associated screen, thatscreen is displayed when the key is pressed. If any settings are changed from the default state,the corresponding indicator lamp next to the key illuminates. Pressing the C/CA key on thenumeric keypad twice returns all settings for the feature to the default state and thecorresponding indicator lamp is extinguished.When the settings for a feature are appropriately set, pressing the same feature key causes thechanges to be accepted and the system returns to the READY state. Pressing a different featurekey while editing a setting is invalid and causes a beep. Pressing a different feature key while notediting a setting causes the requested feature screen to be displayed.If a feature has no associated screen, pressing that feature key switches the feature on (enabled)or off (disabled). When such a feature is enabled, the corresponding indicator lamp isilluminated.If the BEEP function (factory default) is enabled, a beep sound will be heard when a key ispressed. If an improper key is pressed, a multiple beep sound will be heard.The illustration on the following page depicts the special features portion of the Scan SystemControl Panel.
