10 Main Menu110 Wide Format Copy System User GuidePOWER SAVERPOWER SAVER DELA Y (0 − 4 HR): 3Power Saver Screen5. Use the numeric keypad to enter the power saver value. The valid value range is 0to 4 hours. The factory default is 3 hours.6. Press the Enter key to confirm the value.7. Press the Exit key to return to the CONFIGURATION menu screen.Scanner ControlThe SCANNER CONTROL option of the CONFIGURATION menu allows you to set the optionsfor how the Scan System starts and finishes a scan. It contains the following features:• AUTOSCAN - Tells the Scan System either to start the scan automatically when thedocument is inserted (ENABLED), or to wait until the Start key is pressed(DISABLED). ENABLED is the factory default setting.• DOCUMENT RETURN - Tells the Scan System, after the scan, either to return thedocument to the front of the Scan System (FRONT), or to drop the document fromthe rear of the Scan System into the catch tray (REAR). REAR is the factory defaultsetting.NOTE: Refer to Controlling the Scan for additional information.MODE: (PRODUCTIVITY is the default.)• MANUAL WIDTH - The user must enter the document width and very carefully centerthe document. In this mode the document will be prescanned.• AUTOWIDTH - Enables the automatic detection of the width of the document. In thismode the document will be prescanned.• AUTOWIDTH/AUTOCENTER - Enables the automatic centering of the image andautomatic width detection. This selection is the default. In this mode the documentwill be prescanned.• PRODUCTIVITY - This feature does not use AUTOCENTER, requiring the operatorto manually align the document within the media guidelines on the Feed-in Tray. Thewidth sensors eliminate the need for a prescan, thereby increasing the overallthroughput of the system resulting in higher productivity. When this feature is used,the operator must select the media series, ANSI, ARCH, ISO A, ISO B JIS B andCUSTOM etc. since the number of sensors provided cannot monitor every mediatype.To use the MODE: PRODUCTIVITY: CUSTOM the custom sizes must be entered inthe CUSTOM MEDIA FORMATS (Select the Menu key > CONFIGURATION>COPYOPTIONS).To set the Scanner Control features:1. Press the Menu key. The MAIN MENU screen is displayed.2. Press the Enter key to select CONFIGURATION. The CONFIGURATION menuscreen is displayed.
