5 Making Copies58 Wide Format Copy System User GuideSome documents will always exit to the rear at the completion of the scan regardless of theDOCUMENT RETURN setting. These documents include:• Thick documents• Documents longer than 5 feet (1.52 meters)• Documents over 36 inches (914 mm) in widthMODE:MANUAL - The user must enter the width of the document manually, and very carefullycenter the document when inserting it into the Scan System. The document is prescanned inthis mode.AUTOWIDTH - This is the default setting. When AUTOWIDTH is selected, the Scan Systemautomatically detects the width of the document.AUTOWIDTH/AUTOCENTER - The document is prescanned in this mode. WhenAUTOWIDTH/AUTOCENTER is enabled, the Scan System automatically centers the imageand automatically detects the document width.PRODUCTIVITY – ANSI - PRODUCTIVITY is only available on Scan Systems with FreeFlowAccxes firmware 10.0 or higher, Scan System firmware 3.2.6 or higher, and the ProductivityDocument Feed Tray that includes discrete width sensors. PRODUCTIVITY – ANSI is thedefault. Other media type selections include ARCH, ISO A, ISO B, JIS B and CUSTOM.These selections must be made so that the sensors detect the correct width. This featureeliminates the prescan width measurement, which increases document throughput speedresulting in greater productivity. CUSTOM requires standard media sizes to be entered inCUSTOM MEDIA FORMATS.AUTOWIDTH and AUTOWITH/AUTOCENTER are not available in this mode.Select the Menu key > CONFIGURATION>SCAN SYSTEM CONTROL, MODE: for additionalinformation.Image QualityThe Image Quality area of the Scan System Control Panel allows you to make adjustments forboth the type of original document and the output copy to produce the best possible imagequality. It contains selections for Original (Document): Type and Background Suppression,and Copy options lighter or darker.The illustration below depicts the Image Quality portion of the Control Panel. Refer to the ImageQuality section of this manual for additional information.
