2 Getting to know the Wide Format Copy System26 Wide Format Copy System User GuideGraphical Display and Navigation KeysThe middle portion of the Scan System Control Panel contains the graphical display and thenavigation keys. The illustration below depicts the middle portion of the Control Panel.Navigational Keys and Graphical Display AreaGraphical DisplayThe graphical display provides you with information and instructions pertaining to the system. Itconsists of up to four lines of text and graphics. The display can be adjusted upward for betterviewing.Navigation KeysThe navigation keys, located beneath the display, are used to move through the menu screens, toselect items on the screen, and to specify parameters when an options screen is displayed.Some keys have more than one function depending on the screen being displayed at the time.These special functions are explained in later sections.MenuThe Menu key invokes the main menu. If a menu screen is already being displayed, pressing thiskey exits the menus and directly returns you to the previous READY State.PreviousThe Previous key highlights the previous item in a displayed list.NextThe Next key highlights the following item in a displayed list.EnterThe Enter key either confirms the selection of the currently highlighted item or confirms anentered numeric value.ExitThe Exit key cancels a selection operation and returns you to a previous screen. It has othereffects, depending upon the specific situation, that are explained later.ModeThe Mode key is a valid selection only when READY is displayed on the screen. This key is usedto switch between the READY TO COPY mode and the READY TO SCAN mode. The SCANmode can be entered only if the Scan-to-Net feature key is loaded.Below are examples of the READY screen in COPY and SCAN modes.
