Operational SafetySafety Notes v vOperational SafetyYour Xerox printer and supplies were designed and testedto meet strict safety requirements. These include safetyagency examination, approval, and compliance withestablished environmental standards.Your attention to the following safety guidelines will helpto ensure the continued safe operation of your printer.• Use the material and supplies specifically designed foryour printer. The use of unsuitable materials may resultin poor performance and possibly a hazardoussituation.• Follow all warnings and instructions marked on, orsupplied with, the printer.• Place the printer in a dust free area where thetemperature range is 50° F to 90° F (10° C to 32° C) andthe relative humidity is 15% to 85%.• Choose a location for the printer allowing sufficientspace around the printer for operation andmaintenance. The minimum recommended room sizeis 353 cubic ft. (10 cubic meters) or approximately 8 ft.x 8 ft. x 8 ft. (242 cm x 242 cm x 242 cm).• Place the printer in an area where there is adequatespace for ventilation and servicing. The recommendedminimal spacing is 10 in. (25 cm) behind the printer,10 in. (25 cm) on either side of the printer, and 24 in.(61 cm) in front of the printer.
