Option Card InstallationC-24 v DocuPrint C20/NC20 User GuideClosing the SystemBoard from the RightComplete the following steps after you install an optioncard:1 Insert the four tabs on the top of the system board accesscover into the slots on the printer as illustrated.2 Slide the system board access cover to the left until itsnaps into place.3 Reconnect all cables to the back of the printer.4 Reconnect the power cord to the printer and a properlygrounded electrical outlet.5 Verify that the Ready message appears on the ControlPanel display.If an error message appears, see Chapter 5 in the SystemAdministrator Guide.To verify that the option card is installed properly,see Chapter 3, Printing Menu Settings.
